Test Power Factor Phase Angle 580P Clamp Meter Inrush Multimeter 1/3 Phase 1000A TRMS 9999 Count

✅【Digital Clamp multimetre】580P pince amperemetrique multi tester is an auto ranging electrical measuring meter with 9999 counts display. It can measure AC Inrush current(true rms) 0.01A ~ 999.9A, μA current 0.01μA ~ 999.9μA（TRMS), AC & DC volt 0.1mV ~ 600.0V(true rms), Resistance 0.1ohm ~ 99.99MΩ, Capacitance 0.001μF ~ 7000μF, liquid temperature -58°F to 1000°F, Frequency 40Hz to 1KHz. ✅【Electrical Phase Tester】Not just an clip on ammeter, but also a phase rotation tester and phase angle meter. It can test 1/3 phase active Power 99.99KW ~ 600.0KW(99.99HP/800HP), 1/3 phase Apparent Power 0.01KVA~ 600.0KVA, 1/3 phase Reactive Power 0.01KVAr~ 600.0KVAr, 1φ/3φ phase angle 0°~ 360°, power factor 0.3~1.0 ✅【Continuity Tester】Plug the multimeter test leads into the clamp amp meter, then could turn this multimetre numerique into an continuity tester with buzzer. When the electric reading is below 40mV, it will alert you with continous beeping. Smart continuity checker help you to diagnose electrical issues quickly. ✅【Practical Designs】 45mm open jaw design, no need to break or touch the electrical wires, just clip on and then could measure AC ampere up to 1000 amp easily; One click "data hold" button to freeze the measurement data for further analysis; Backlight LCD display, show you the data clearly even in dark. Useful VOM DMM meter in HVAC AC compressor, car motors battery and household appliances maintenance. ✅【Safety & Quality】Qualified with IEC 1010-2-32 and EN-61010-1 concerning electronic measuring instruments with an over-voltage category 600V(CAT II). 600V and 1000A overload protection, protect you and the clamp on multimetre tester properly.

Category